View Cart :: My Account ::
Home > Support > Software Installation & Short Cuts

E-commerce Support

Software / Downloads

Software Installation & Short Cuts

FAQ
Software Installation & Short Cuts

Software Installation and Short Cuts

Installing From Disk
1. Verify that software disk is either Version 4 (3/99) or Version 6. If not, download software from web site
2. Insert Disk into A: drive (or floppy drive)
3. Click START
4. Select RUN
5. Type in A:\setup
6. Click OK
7. Read licensing agreement and click YES
8. Select your Word Processor and click OK. If the publisher cannot be determined, click YES to install anyway
9. Select Redi-TAG PRODUCTS as the program manager group and click OK
10. Once installation is complete, run software

Installing From Web Site
1. Verify that no existing version of Redi-TAG software is on your system
2. Link to our Download page
3. Fill out Registration Page
4. Click SUBMIT
5. Click on the DISK ICON to begin downloading
6. Select RUN FROM CURRENT  LOCATION
7. Read licensing agreement and click YES
8. Select your Word Processor and click OK. If the publisher cannot be determined, click YES to install anyway
9. Select Redi-TAG PRODUCTS as the program manager group and click OK
10. Once installation is complete, run software

Uninstall Software
1. Click START
2. Select SEARCH
3. Select FILES OR FOLDERS
4. Verify that you are looking in your C: drive and check INCLUDE SUB FOLDERS
5. Type in BTE under NAMED
6. Delete the BTE TABS file folder and the BTE_TABS.ini or configuration file
7. You may also delete any BTE shortcut files that contain the words CREATE PRODUCTS or LASER PRODUCTS

Running Version 4 (3/99)
1. Click START
2. Select PROGRAMS
3. Select BTE PRODUCTS.If BTE PRODUCTS cannot be found, try under ACCESSORIES
4. Select CREATE PRODUCTS (WORD or WORDPERFECT)
5. If a warning message about macros appears, select ENABLE MACROS. If using Word 2000 and macros are disabled, refer to help for WORD 2000 USERS. Highlight the item number of the Redi-Tag product you are using
6. Select the correct orientation for your tabs/flags (SIDE/LEFT or BOTTOM/RIGHT)
7. Select the appropriate printer orientation
8. Click OK. Program will bring up template

Running Version 6
1. Click START
2. Select Redi-TAG PRODUCTS (WORD or WORDPERFECT)
3. If a warning message about macros appears, select ENABLE MACROS. If using Word 2000 and macros are disabled, refer to help for WORD 2000 USERS
4. Highlight the item number of the Redi-Tag product you are using
5. Select the correct orientation for your flags or tabs (one must be chosen)
6. Select the appropriate printer orientation
7. Click OK
8. Program will bring up template

Support For Word 6
1. Verify that you are using VERSION 4 ((3/99) If using Version 3 (12/97), install and run Version 4 from this web site. Keep in mind, Version 6  of the  Redi-TAG software does not offer support
2. If problems persist, call Tech Support at 800-421-7585
Enabling Macros in Word 2000
1. Open WORD 2000
2. Click TOOLS
3. Select MACROS
4. Select SECURITY
5. Change setting to MEDIUM
6. Click OK
7. Close WORD 2000
8. It is recommended that all WORD 2000 Users download Version 6 is currently available on this web site at: Software / Downloads

Support for WordPerfect 6.1
1. Verify that you are using VERSION 4 (3/99) If using Version 3 (12/97), install and run Version 4 from this web site. Keep in mind, Version 6  of the  Redi-TAG software does not offer support
2. If problems persist, call Tech Support at 800-421-7585

Support for WordPerfect 7
1. Verify that you are running VERSION 6
2. If Redi-TAG software will not run, open WordPerfect 7
3. Click FILE
4. Select NEW
5. In SELECT NEW DOCUMENT dialog box, highlight Redi-TAG PRODUCT SELECTOR
6. Click SELECT
7. If problems persist, call Tech Support at 800-421-7585

Support For WordPerfect 9
1. All WORDPERFECT 9 users must download VERSION 7 from this web site in addition to downloading Service Pack 3 from the Corel web site: www.corel.com
2. Check to see which Core  Service Packs have already been downloaded by opening WORDPERFECT 9, clicking on HELP and selecting ABOUT WORDPERFECT
3. Version numbers are as follows:
i) Initial Release 9.0.0.528
ii) Sevice Pack 9.0.0.588
iii) Service Pack 9.0.0.664
iv) Service Pack 9.0.0.738
4. If problems persist, call Tech Support at 800-421-758

Duplicating A Phrase
1. For WORD:
Type Phrase into FIRST CELL
Hit TAB
Hit ALT +F8
Highlight BTEDUP.MAIN
Click RUN

2. For WordPerfect:
Type Phrase into FIRST CELL
Click TOOLS
Select TEMPLATE MACRO
Select PLAYHighlight BTEDUP
Click PLAY
Click OK to copy current selection

Printing Bottom Tabs on  2" Ink Jet Tabs
1. Use the 2" Ink Jet Tab template for Side Tabs
2. Click FILE
3. Select PAGE SETUP
4. Click the MARGINS tab
5. Change the TOP margin to 1.6 ‘
6. Change the BOTTOM margin to  0"
7. For INK JET  PRINTERS
Feed the sheet into the printer in the following direction:
FEED THIS DIRECTION FOR SIDE TABS USING LASER PRINTERS
8. 8.For LASER PRINTERS
Feed the sheet into the printer in the following direction:
FEED THIS DIRECTION FOR SIDE TABS USING INK JET PRINTERS

Vertical Text on Side Tabs (Not Exact)
1. Insert a TEXT BOX over a defined cell of the template
2. Type Phrase into Text Box
3. Highlight TEXT
4. Click FORMAT
5. Select TEXT  DIRECTION
6. Select the text orientation that suits your needs and click OK


For Assistance, E-mail us :: Or Call us at 1-800-421-7585
© Redi-Tag Corporation :: 51 Century Blvd., Suite 100 :: Nashville TN 37214
Conditions of Use :: Privacy Policy